Basic Info.
Horizontal Resolution
600tvl
Feature
High Definition, Mini Size
Remote Control
Without Remote Control
Product Description
I. Product structure
1. Display screen
2. WiFi link indicator
3. Night light
4. Camera
5. Set key
6. UP 12/24 shift key
7. DOWN
8. Charge indicator
9. USB charge port
10. Battery cover
Time set
1. Press SET once to set up hour, press UP/DOWN to set up current time, press SET to set up minute, press UP/DOWN again to select current minute, then press SET again to finish setting. (as shown in the figure below)
II. APP software download
- -
(Figure 1) (Figure 2)
Method 1: scan quick-response code (Figure 1) directly to enter download page (Figure 2). Select software to download based on phone system. (Note: this installation is for Mainland China only)
Method 2: for Android system, search for RMON APP in Google Play, then download and install.
For Apple system, search for RMON APP in AppStore, then download and install.
III. Device installation
1. Remove battery insulation piece, and plug on charger. Turn ON/OFF switch of the device. (The device turns on in 30 seconds, blue light flashes quickly.)
2. Blue light flashes quickly for 30s and searches for WiFi connected with the device before. (In this mode, device will connect with previous network after power off automatically)
3. If no WiFi is found, device will restart (in 30s) automatically, and blue light flashes slowly. (in this mode, device is sending WiFi hotspot for mobile phone to search for connection )
4. When blue light flashes slowly (2 minutes after startup), search for WiFi hotspot (name started with YM) by mobile phone for connection. Exit when connection is done. Then enter APPdownloaded, and start to configure to router network. (Specific operations are as below)
5. Red light is charge indicator. It is off after full charge.
IV. WiFi connection approach 1 (point to point). (For iphone)
1. Search for device hotspot connection 2. When WiFi icon appears, turn on APP 3, click to add.
4. Select add approach. 5. Click to search for LAN. 6. Click camera, then click confirm.
7. Click setup icon. 8. Click advanced setting. 9. Select WiFi configuration.
10. Select available network name. 11. Input password, the device is re-connected with network after confirmation.
3. "Successful WIFI configuration" appears, the device will restart again. The device start up in 30s, blue light is on constantly. (Blue light constantly on means the device is connected with network)
4. At this moment, APP may add and search for camera. (in the same network environment)
V. TF card connection
1. Insert TF card into device to start up. The device will generate a document in TF card. Open the document to change name and save password. Then insert card into machine for startup. The device will connect with network automatically. (As shown in the figure below)
(Before change) (After change)
Precautions
1. Please make changes according to document format.
2. Please note case matters.
3. Please input correct network name and password.
VI. Screenshot, video recording, alarm
1. Click online device to view videos. There will be three options: 1080P, 720P, 480P. Adjust image quality and video fluency based on current network environment. Besides, you may adjust image color contrast and brightness. Functions are: monitoring, photograph, video recording, and then turn image left/right, up/down. Click photograph or video recording, this picture or video will be saved in internal storage of the phone. (As shown in the figure below)
2. Long press online device, there will be more setting options.
1.Advanced setting. (It allows changing basic functions of the device remotely)
3. To change device password, select, input original password 8888 first, then input new password.
VII. Operation instructions for administrator
1. Install search tool in random disc on computer. (Note: administrator setting is only available for LAN)
2. Click , device connected and found will appear. (As shown in the figure below)
3. Double click the IP searched. Enter the next page to input admin, click confirm. (Note: the original user name is admin, no password).
4. When the above operations are done, enter setting interface. For first use, download plug-in (clickto download and to install) and language selection (as shown in the figure below).
5. Then click to enter setting up page. (As shown in the figure below)
6. Click to set up. (As shown in the figure below)
7. For system management setting, select items to be set up. (As shown in the figure below)
VIII. Description of main functions
1. Time setting
Open system management -----click time setting----select time zone----synchronize with host machine-----save.
2. Administrator's password setting
Open "change password"----enter new password----confirm new password----save.
3. Change device password (original password is 8888)
Open network setting-----P2P setting-----input new password-----save----return to system management to restart the device. (APP supports remote setting)
4. Alarm setting
Open alarm setting-----enter alarm setting-----click IPCcamera built-in----select desired sensitivity (6 is recommended)
5. SD card setting
For first use, please format SD card. Enter SD card setting to select desired function. Then set up other functions.
6. Watch SD card contents
1.Unplug the card directly. Watch by card reader.
2. Replay by APP remotely.
3. Open SD card video image, select video files, then save as desired videos.
IX. Specifications
Pixel
5million CMOS
Resolution ratio
1080P
Video format
AVI
Frame number
25
Angle of view
140 degrees
Night light
10 pcs
Distance of motion detection camera shooting
6m straight line
Minimum illumination
1LUX
Battery capacity
2400MA
Continuous video recording time
Above 24h
Compressed format
H.264
Sound recording range
5
Power consumption
260MA/3.7V
Storage temperature
-20-80ºC
Operating temperature
-10-60 ºC
Operation humidity
15-85%RH
Type of memory card
TF card
Maximum capacity of memory card
32GB
Player
VLCPlayer/SMPlayer
Computer operation system
Windows/Mac OS X
Mobile phone operation system
Android/iOS
Web browser
IE7 and above,chrome,firefox safari.etc
Maximum visits
8
X. FAQ
1. Remote control is not fluent. Please select proper definition based on current network environment.
2. SD card will not save. For first use of SD card, please format it.
3. It is unable to connect with network. Please select connection method based on your own network features.
4. Watch SD card video by APP remotely is not fluent. That is because decoding ability of mobile phone varies. You may adjust video recording to definition suitable for your own mobile phone.
5. Password is forgotten. Please press device reset key 4s to restore factory settings.
6. If indicator goes abnormal and connection is not smooth due to long time use of the device, please restore factory value first (press reset key for more than 3s) before reconnection.
XI. Precautions
Application occasions: please observe national laws and regulations strictly. Do not use this product for other illegal purposes, otherwise it will be at your own risk. Software upgrade: for better performance of the product, factory will continue to improve product software. This product allows upgrading software by customers themselves. Please consult local dealers for latest software information and upgrade method.
Operating temperature: please use it under natural temperature. Do not work under temperature which is not suitable for human body.
Operating humidity: please use it under humidity suitable for human life. Do not put it under humid environment. The product is not water proof.
Shooting illumination: please use it under sufficient light source. Do not put camera under highlight source such as sun so as to prevent optical devices from being damaged.
Cleaning requirements: do not use it under environment with oversize dust density so as to prevent camera lens and other parts from being contaminated by dust and to protect camera shooting results. You may swipe clean the camera lens gently by lens paper or cloth. Keep it clean. Other matters: this is precision electronic products. Keep it away from strong impact or vibration; do not use it under high-intensity magnetic field or electrical field.